technisches Datenblatt

Artikelnummer

11604

Kabelfamilie

O.R. FRX-ST® PROFIBUS®  

Zusammensetzung: (1x2xAWG22/19)SN/ST

Verlegungsart: CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN

Kategorie: PROFIBUS®

Anforderungen/Zulassungen: CE/UL/CSA

Abschirmung: SHIELDED

UL RECOGNIZED E244280CSACERoHS2014/30/EUPROFI BUS

Gruppe // 1x2xAWG22

Ader
Material Bare copper
Kapillardurchmesser - Flexible (DIN VDE 0295, IEC 60228 or CEI 20-29)
Aderzahl 2
auswählen Nennwert AWG22 AWG
Isolierung
Material Foam polyolefin
Farbe Green, Red.

Gesamt Kabelaufbau

Zwischen-Bandumwicklung
auf Zusammensetzung Around the total assembly. (optional)
Material Non-woven tape
Gesamt-Schirm
auf Zusammensetzung On the tape. Aluminium outside
Material Aluminium/polyester tape
Schirmform Overlapped shielding tape
Abdeckung >100 %
Beidraht-Ader Not available
Gesamt-außenchirm
auf Zusammensetzung On the tape shield.
Material Tinned copper
Schirmform Braid shield
Abdeckung 60 %
Beidraht-Ader Not available
Gesamt-Bandumwicklung
auf-Zusammensetzung On the braid shield.
Material Non-woven tape
Gesamt-Mantel
Material PVC
Farbe Violet RAL 4001 DESINA ®
Durchmesser (mm) 8±0.35
Kennzeichnung
Metrisches markieren P/N 11604 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 2571 80°C VW-1 - AWM I/II A/B 80°C 300V FT1 - PROFIBUS - FLEXIBLE CONTROL DATA - BUS - DP - F.I.P. - 150ohm - O.R. FRX-ST® (1x2xAWG22)H/H2 - year/week - batch - DESINA® - CE meter indication
elektrische-Merkmale
Betriebsspannung 300 V
Testspannung 2000 V
nennkapazität <=30 pF/m
Nennimpedanz 150±10% ohm
elektrischer-Widerstand <=55,4 ohm/km
Isolierwiderstand 5 Gohm/km
Übertragungsgeschwindigkeit Up to 12Mbit/s
Abschwächung ***PROFIBUS® DP*** Attenuation Frequency[MHz]/attenuation.std(dB/100m)/Attenuation.typical[ 0,0096/--/0,3 - 0,0384/--/0,5 - 0,2/--/0,5 - 4/--/2,2 - 16/--/4,4 - 20/- ATTENUAZIONE Frequenza[MHz]/attenuaz.standard(dB/100m)/Attenuaz.tipica[d 0,0096/--/0,3 - 0,0384/--/0,5 - 0,2/--/0,6 - 4/--/2,2 - 16/--/4,4 - 20/-
dynamische-Merkmale
Mindestbiegeradius festinstallation 10 times ø cable
Mindestbiegeradius mobile verlegung 12 times ø cable
Betriebstemperatur festinstallation -40°C / +80°C
Betriebstemperatur mobile verlegung -5°C / +80°C
Verschiebungsgeschwindigkeit Up to 120 m/min
Beschleunigung-Verzögerung Up to 4 m/sec²
Kabellänge in der Kette Up to 10 m
Kabellänge Anmerkungen (horizontal only)
garantierte-Zyklen Up to 5 Mio
Anmerkungen The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department.
Zulassungen und Normen
Referenznormen 1581, UL 758(UL); C22.2 n° 210(CSA); DIN EN 61784-1, DIN EN 61158; NETBUS L2/F.I.P.(Factor,Instrumentation,Protocol), PROFIBUS® DP (DIN 19245), RS 485
UL/CSA Zulassungen RU E244280 AWM STYLE 2571 80°C 300V CSA E244280 AWM I/II A/B 80°C 300V
Brandverhalten VW-1(UL); FT1(CSA); IEC 60332-1-2(EU)
Bestendigkeit gegen Industrieöle 1581(UL); IEC 60811-404(EU); CEI EN 50363-4-1(EU); ICEA S-82-552; IRM 902
halogenfrei NO
Zollnummer
Zolltarif 85444995
Made in IT
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A..