technisches Datenblatt

Artikelnummer

15050

Kabelfamilie

Profibus®  

Zusammensetzung: (1x2xAWG22/7)SN/ST

Verlegungsart: CABLE FOR STATIC INSTALLATION

Kategorie: PROFIBUS®

Anforderungen/Zulassungen: CE/UL/CSA

Abschirmung: SHIELDED

UL RECOGNIZED E244280CSACERoHS2014/30/EUPROFI BUS

Gruppe // 1x2xAWG22

Ader
Material Bare copper
Kapillardurchmesser - Flexible (DIN VDE 0295, IEC 60228 o CEI 20-29)
Aderzahl 2
auswählen Nennwert AWG22 AWG
Isolierung
Material Foam polyolefin
Farbe Green, Red.

Gesamt Kabelaufbau

Zwischen-Bandumwicklung
auf Zusammensetzung Around the total assembly.
Material Polyester tape
Gesamt-Schirm
auf Zusammensetzung On the tape. Aluminium outside.
Material Aluminium/polyester tape
Schirmform Overlapped shielding tape
Abdeckung >100 %
Beidraht-Ader Not available
Gesamt-außenchirm
auf Zusammensetzung On the tape shield.
Material Tinned copper
Schirmform Braid shield
Abdeckung 65 %
Beidraht-Ader Not available
Gesamt-Mantel
Material PVC
Farbe Violet RAL 4001 DESINA ®
Durchmesser (mm) 8±0.35
Kennzeichnung
Metrisches markieren P/N 15050 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 2571 80°C VW-1 - AWM I/II A/B 80°C 300V FT1 - PROFIBUS - FLEXIBLE CONTROL DATA - BUS - DP - F.I.P. - 150ohm - O.R. FE (1x2xAWG22)H/H2 - year/week - batch - DESINA® - CE meter indication
elektrische-Merkmale
Betriebsspannung 300 V
Testspannung 2000 V
nennkapazität <=30 pF/m
Nennimpedanz 150±10% ohm
elektrischer-Widerstand <=55,4 ohm/km
Isolierwiderstand 5 Gohm/km
Übertragungsgeschwindigkeit Up to 12Mbit/s
Ausbreitungsgeschwindigkeit 77%
Abschwächung ** PROFIBUS® DP *** ATTENUATION Frequency[MHz]/attenuation.std(dB/100m)/Attenuation.typical[ 0,0096/0,3/--/ - 0,0384/0,5/--/ - 4/3,2/--/ - 10/3,2/--/ - 16/4,0/--/ -
dynamische-Merkmale
Mindestbiegeradius festinstallation 10 times ø cable
Betriebstemperatur festinstallation -30°C / +80°C
Installationstemperatur Text -5°C / +80°C
Anmerkungen For fixed installation without any mechanical stress.
Zulassungen und Normen
Referenznormen 1581, UL 758(UL); C22.2 n° 210(CSA); DIN EN 61784-1, DIN EN 61158; NETBUS L2/F.I.P.(Factor,Instrumentation,Protocol), PROFIBUS® DP (DIN 19245), RS 485
UL/CSA Zulassungen RU E244280 AWM STYLE 2571 80°C CSA E244280 AWM I/II A/B 80°C 300V
Brandverhalten VW-1(UL); FT1(CSA); IEC 60332-1-2(EU)
Bestendigkeit gegen Industrieöle 1581(UL); IEC 60811-404(EU); CEI EN 50363-4-1(EU); ICEA S-82-552; IRM 902
halogenfrei NO
Kompatibilität
Verkabelung/hersteller Siemens / 6XV1830-0EH10
Zollnummer
Zolltarif 85444995
Made in IT
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A..