Zusammensetzung: (2x2x0,22+1x0,22)ST
(2x2xAWG24+1xAWG24)ST
Verlegungsart: CABLE FOR STATIC INSTALLATION
Kategorie: RS485 - 2 PAIRS + GND
Anforderungen/Zulassungen: UL/CSA
Abschirmung: SHIELDED
Ader | |
---|---|
Material | Tinned copper |
Kapillardurchmesser | - Flexible (DIN VDE 0295, IEC 60228 o CEI 20-29) |
Aderzahl | 2 |
auswählen Nennwert | 0,22 mm² |
Isolierung | |
---|---|
Material | Foam polyolefin |
Farbe | White-Brown, Green-Yellow |
Ader | |
---|---|
Material | Tinned copper |
Kapillardurchmesser | - Flexible (DIN VDE 0295, IEC 60228 o CEI 20-29) |
Aderzahl | 1 |
auswählen Nennwert | 0,22 mm² |
Isolierung | |
---|---|
Material | Foam polyolefin |
Farbe | Grey |
Zwischen-Bandumwicklung | |
---|---|
auf Zusammensetzung | Around the total assembly. |
Material | Transparent tape |
Gesamt-Schirm | |
---|---|
auf Zusammensetzung | On the tape. |
Material | Tinned copper |
Schirmform | Braid shield |
Abdeckung | >=85 % |
Beidraht-Ader | Not available |
Gesamt-Bandumwicklung | |
---|---|
auf-Zusammensetzung | On the braid shield. |
Material | Non-woven tape |
Gesamt-Mantel | |
---|---|
Material | Polyurethane non-abrasive |
Farbe | Gray RAL 7001 |
Durchmesser (mm) | 5.8±0.3 |
Kennzeichnung | |
---|---|
Metrisches markieren | P/N 15166 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20236 80°C 30V - AWM I/II A/B 80°C 30V FT1 - CONTROL DATA 120 ohm (2x2x0,22+1x0,22) - year/week meter indication |
elektrische-Merkmale | |
---|---|
Betriebsspannung | 30 V |
Testspannung | 500 V |
nennkapazität | <=45 pF/m |
Nennimpedanz | 120±15% ohm |
elektrischer-Widerstand | <=87,6 ohm/km |
Isolierwiderstand | 5 Gohm/km |
Abschwächung | *** RS485 SERIAL + GND *** -------------------------------------------- ATTENUATION Frequency[MHz]/Attenuation.std(dB/100m)/Attenuation.typical( --/--/-- - |
dynamische-Merkmale | |
---|---|
Mindestbiegeradius festinstallation | 6 times ø cable |
Betriebstemperatur festinstallation | -30°C / +80°C |
Installationstemperatur Text | -5°C / +80°C |
Kabellänge Anmerkungen | Flexible use (not for drag chains) |
Anmerkungen | For fixed installation without any mechanical stress. |
Zulassungen und Normen | |
---|---|
Referenznormen | 1581, UL 758(UL); C22.2 n° 210(CSA); IEC 62026-1(EU); CEI EN 50325-1(EU); RS 485 |
UL/CSA Zulassungen | RU E244280 AWM STYLE 20236 80°C 30V CSA E244280 AWM I/II A/B 80°C 30V |
Brandverhalten | FT1(CSA); IEC 60332-1-2(EU) |
Bestendigkeit gegen Industrieöle | 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902 |
halogenfrei | SI |
Zollnummer | |
---|---|
Zolltarif | 85444993 |
Made in | IT |
Bearbeitung | |
---|---|
Datum | 30032018 |
Nummer | 005 |
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A.. |