Zusammensetzung: 2x(2x0,25)ST/N+6x0,25
2x(2xAWG24)ST/N+6xAWG24
Verlegungsart: CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN
Kategorie: CANOPEN®
Anforderungen/Zulassungen: UL/CSA
Abschirmung: SHIELDED
Ader | |
---|---|
Material | Tinned copper |
Kapillardurchmesser | - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) |
Aderzahl | 4 |
auswählen Nennwert | 0,25 mm² |
Isolierung | |
---|---|
Material | Polyolefin |
Farbe | White-Brown, Green-Yellow |
Zwischen-Bandumwicklung | |
---|---|
Zusammensetzung | Around each pair. |
Material | Transparent tape |
Schirm | |
---|---|
auf Zusammensetzung | On each taped pair. |
Material | Tinned copper |
Schirmform | Braid shield |
Abdeckung | >=90 |
Beidraht-Ader | Not available |
Bandumwicklung | |
---|---|
auf Zusammensetzung | On each shielded pair. |
Material | Polyester tape |
Ader | |
---|---|
Material | Tinned copper |
Kapillardurchmesser | - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) |
Aderzahl | 6 |
auswählen Nennwert | 0,25 mm² |
Isolierung | |
---|---|
Material | Polyester |
Farbe | Grey, Pink, Blue, Red, Black, Violet |
Gesamt-Bandumwicklung | |
---|---|
auf-Zusammensetzung | Around the total assembly. |
Material | Non-woven tape |
Gesamt-Mantel | |
---|---|
Material | Polyurethane non-abrasive |
Farbe | Matte black RAL 9005 |
Durchmesser (mm) | 10.7±0.4 |
Kennzeichnung | |
---|---|
Metrisches markieren | P/N 20162 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20236 80°C 30V - AWM I/II A/B 80°C 30V FT1 - 2x(2xAWG24)H2+6xAWG24 - O.R. PMXX®-ST [2x(2x0,25)H2+6x0,25] - IEC 60332-1-2 - year/week - CE meter indication |
elektrische-Merkmale | |
---|---|
Betriebsspannung | 30 V |
Testspannung | 500 V |
nennkapazität | <=50 pF/m |
Nennimpedanz | 120±10% ohm |
elektrischer-Widerstand | <=87,6 ohm/km |
Isolierwiderstand | 20 Mohm/Km |
Übertragungsgeschwindigkeit | Up to 1Mbit/s |
dynamische-Merkmale | |
---|---|
Mindestbiegeradius festinstallation | 6 times ø cable |
Mindestbiegeradius mobile verlegung | 10 times ø cable |
Betriebstemperatur festinstallation | -50°C / +80°C |
Betriebstemperatur mobile verlegung | -40°C / +80°C |
Verschiebungsgeschwindigkeit | Up to 200 m/min |
Beschleunigung-Verzögerung | Up to 10 m/sec² |
Kabellänge in der Kette | Up to 15 m |
Kabellänge Anmerkungen | (horizontal only) |
garantierte-Zyklen | Up to 5 Mio |
Anmerkungen | The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department. |
Zulassungen und Normen | |
---|---|
Referenznormen | 1581, UL 758(UL); C22.2 n° 210(CSA); ISO 11898; RS 485 |
UL/CSA Zulassungen | RU E244280 AWM STYLE 20236 80°C 30V CSA E244280 AWM I/II A/B 80°C 30V |
Brandverhalten | FT1(CSA); IEC 60332-1-2(EU) HALOGEN FREE: IEC 60754-1(EU) |
Bestendigkeit gegen Industrieöle | 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902 |
halogenfrei | SI |
Bestendigkeit gegen UV-Strahlen | UV RESISTANT |
Zollnummer | |
---|---|
Zolltarif | 85444993 |
Made in | IT |
Bearbeitung | |
---|---|
Datum | 30032018 |
Nummer | 005 |
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A.. |