technisches Datenblatt

Artikelnummer

20429

Kabelfamilie

KABEL FÜR SENSOREN UND FOTOZELLEN  

Zusammensetzung: 25G0,50

25GAWG21 FOR TORSION: 360° / MINIMUMM BENDING RADIUS: 13 x ø cavo

Verlegungsart: CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN

Kategorie: MULTI CORE POWER or CONTROL CABLE

Anforderungen/Zulassungen: CE/UL/CSA

Abschirmung: UNSHIELDED

UL RECOGNIZED E244280CSACERoHS

Gruppe // 25G0,50

Ader
Material Bare copper
Kapillardurchmesser - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29)
Aderzahl 25
auswählen Nennwert 0,50 mm²
Isolierung
Material Polyolefin
Farbe Black conductors with numbers from 1 to 24 + Green/Yellow
Bandumwicklung
auf Zusammensetzung Between the conductors rings (optional).
Material Transparent tape

Gesamt Kabelaufbau

Gesamt-Bandumwicklung
auf-Zusammensetzung Around the total assembly.
Material Transparent tape
Gesamt-Mantel
Material Polyurethane non-abrasive
Farbe Gray RAL 7040 DESINA ®
Durchmesser (mm) 13±0.4
Kennzeichnung
Metrisches markieren P/N 20429 TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20233 80°C 300V - AWM I/II A/B 80°C 300V FT1 - 25GAWG21 - O.R. PMXX® 25G0,5 - 450/750V - IEC 60332-1-2 - year/week - DESINA® - CE meter indication
Informationsvermerke
SPECIAL FOR TORSIONS
elektrische-Merkmale
Betriebsspannung 300 V
Testspannung 2000 V
dynamische-Merkmale
Mindestbiegeradius festinstallation 6 times ø cable
Mindestbiegeradius mobile verlegung 13 times ø cable
Betriebstemperatur festinstallation -50°C / +80°C
Betriebstemperatur mobile verlegung -40°C / +80°C
Verschiebungsgeschwindigkeit Up to 240 m/min
Beschleunigung-Verzögerung Up to 30 m/sec²
Kabellänge in der Kette Up to 15 m
Kabellänge Anmerkungen (horizontal only)
garantierte-Zyklen Up to 5 Mio
Verdrehungen +/- 360° about 1 meter.
Anmerkungen The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department.
Zulassungen und Normen
Referenznormen 1581, UL 758(UL); C22.2 n° 210(CSA)
UL/CSA Zulassungen RU E244280 AWM STYLE 20233 80°C 300V CSA E244280 AWM I/II A/B 80°C 300V
Brandverhalten FT1(CSA); IEC 60332-1-2(EU) HALOGEN FREE: NO HALOGEN
Bestendigkeit gegen Industrieöle 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902
halogenfrei NO
Bestendigkeit gegen UV-Strahlen UV RESISTANT
Zollnummer
Zolltarif 85444995
Made in IT
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A..