technical data sheet

part number

12746

cable family

O.R. PMXX-ST® PROFIBUS®  

Formation: (1x2xAWG22/44)ST/SN

installation type: CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN

category: PROFIBUS®

standard/approval: UL/CSA

shielding: SHIELDED

UL RECOGNIZED E244280CSAHalogen FreeRoHS2014/30/EUPROFI BUS

group // 1x2x0,34

conductor
material Bare copper
capillary diameter - Extra-flexible copper
conductors number 2
rated section 0,34 mm²
insulation
material Foam polyolefin
colour Green, Red.

total assembly make-up

intermediate taping
on make-up Around the total assembly.
material Polyester tape
total shield
on make-up On the tape.
material Tinned copper
shield shape Braid shield
coverage >=85 %
drain wire Not available
total shield external
on make-up On the braid shield
material Aluminized tape
shield shape Overlapped shielding tape
coverage 100 %
drain wire Not available
total taping
on make-up on the braid shield
material Aluminized tape
total sheath
material Polyurethane non-abrasive
colour Violet RAL 4001 DESINA ®
diameter (mm) 8±0.35
Marking
Metric marking P/N 12746 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20236 80°C 30V VW-1 - AWM I/II A/B 80°C 30V FT1 - PROFIBUS - FLEXIBLE CONTROL DATA - BUS - DP - F.I.P. - 150ohm - O.R. PMXX-ST® (1x2xAWG22)H2/H - year/week - DESINA® meter indication
information notes
Non è garantita la tonalità del colore della guaina con cavo esposto ai raggi UV.
electrical features
working voltage 30 V
test voltage 500 V
rated capacity <=30 pF/m
rated impedance 150±10% ohm
electrical resistance <=55,4 ohm/km
insulation resistance >=1 Gohm/km
transmission speed Up to 12Mbit/s
attenuation *** PROFIBUS® DP*** ATTENUATION Frequency[MHz]/Attenuation.std(dB/100m)/Attenuation.typical[ 0,0096/--/0 200/--/0,7 - 16/--/4,9 - 20/--/5,4
dynamic features
minimum bending radius static installation 6 times ø cable
minimum bending radius dynamic installation 7.5 times ø cable
working temperature static installation -50°C / +80°C
working temperature dynamic installation -40°C / +80°C
travel speed Up to 200 m/min
acceleration/deceleration Up to 10 m/sec²
cable length inside chain Up to 15 m
chain length notes (horizontal only)
guaranteed cycles Up to 5 Mio
notes The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department.
approvals and standards
reference standards 1581, UL 758(UL); C22.2 n° 210(CSA); DIN EN 61784-1, DIN EN 61158; NETBUS L2/F.I.P.(Factor,Instrumentation,Protocol), PROFIBUS® DP (DIN 19245), RS 485
ul csa approvals RU E244280 AWM STYLE 20236 80°C 30V CSA E244280 AWM I/II A/B 80°C 30V
fire behaviour FT1(CSA); IEC 60332-1-2(EU) HALOGEN FREE: IEC 60754-1(EU)
industrial oil resistance 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902
halogen free SI
UV resistance UV RESISTANT
compatibility
wiring/manufacturer Siemens / 6XV1830-0JH10
wiring/manufacturer Siemens / 6XV1831-2L/J
Customs code
Customs-tariff number 85444993
Made in IT
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A..