technical data sheet

part number

14391

cable family

O.R. PMXX-ST® DEVICENET™  

Formation: [(2xAWG24)SN+(2xAWG22)SN]ccST

** DROP **

installation type: CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN

category: DEVICENET™

standard/approval: CE/UL/CSA

shielding: SHIELDED

UL RECOGNIZED E244280CSAHalogen FreeCERoHS2014/30/EU

group 1 // Data pair / 2xAWG24

conductor
material Tinned copper
capillary diameter - Extra-flexible copper
conductors number 2
rated section AWG24 AWG
insulation
material Foam polyolefin
colour Blue, White.
shield
on make-up Around the pair. Aluminium outside.
material Aluminium/polyester tape
shield shape Overlapped shielding tape
coverage >=100
drain wire Not available

group 2 // Supply pair / 2xAWG22

conductor
material Tinned copper
capillary diameter - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29)
conductors number 2
rated section AWG22 AWG
insulation
material Polyolefin
colour Red, Black.
shield
on make-up Around the pair. Aluminium outside.
material Aluminium/polyester tape
shield shape Overlapped shielding tape
coverage >=100
drain wire Not available

total assembly make-up

total shield
on make-up Around the total assembly. (Drain in the inner side)
material Tinned copper
shield shape Braid shield + drain wire
coverage >=65 %
drain wire Available
drain material Tinned copper
drain rated section AWG22
total taping
on make-up On the shield.
material Non-woven tape
total sheath
material Polyurethane non-abrasive
colour Violet RAL 4001
diameter (mm) 7±0.35
Marking
Metric marking P/N 14391 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20233 80°C 300V - AWM I/II A/B 80°C 300V FT1 - CONTROL DATA BUS - DeviceNet - O.R. PMXX-ST® [(2xAWG24)H+(2xAWG22)H]H2 - year/week - CE meter indication
electrical features
working voltage 300 V
test voltage 2000 V
rated capacity (AWG24) <=40 pF/m
rated impedance 120±10% ohm
electrical resistance (AWG24) <=81,6 ohm/Km; (AWG22) <=55,4 ohm/km
insulation resistance <=5 Gohm/km
transmission speed Up to 500Kbit/s
propagation speed (AWG24) 76%
attenuation *** DeviceNet™ Drop *** -------------------------------------------- ATTENUATION Frequency[MHz]/Attenuation.std(dB/100m)/Attenuation.typical[ 0,1/--/0,9 - 0,5/--/1,6 - 1/--/2,1 -
dynamic features
minimum bending radius static installation 6 times ø cable
minimum bending radius dynamic installation 10 times ø cable
working temperature static installation -50°C / +80°C
working temperature dynamic installation -40°C / +80°C
travel speed Up to 200 m/min
acceleration/deceleration Up to 10 m/sec²
cable length inside chain Up to 15 m
chain length notes (horizontal only)
guaranteed cycles Up to 5 Mio
notes For application in dynamics installation with very low temperatures contact our technical department.
approvals and standards
reference standards 1581, UL 758(UL); C22.2 n° 210(CSA); IEC 62026-3, IEC EN 50325-2(EU); DIN EN 61158; ISO 11898
ul csa approvals RU E244280 AWM STYLE 20233 80°C 300V CSA E244280 AWM I/II A/B 80°C 300V
fire behaviour FT1(CSA); IEC 60332-1-2(EU) HALOGEN FREE: IEC 60754-1(EU)
industrial oil resistance 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902
halogen free SI
UV resistance UV RESISTANT
Customs code
Customs-tariff number 85444995
Made in IT
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A..