technical data sheet

part number

15166

cable family

GND - RS485  

Formation: (2x2x0,22+1x0,22)ST

(2x2xAWG24+1xAWG24)ST

installation type: CABLE FOR STATIC INSTALLATION

category: RS485 - 2 PAIRS + GND

standard/approval: UL/CSA

shielding: SHIELDED

UL RECOGNIZED E244280CSAHalogen FreeRoHS2014/30/EU

group 1 // RS485 serial / 2x2x0,22

conductor
material Tinned copper
capillary diameter - Flexible (DIN VDE 0295, IEC 60228 o CEI 20-29)
conductors number 2
rated section 0,22 mm²
insulation
material Foam polyolefin
colour White-Brown, Green-Yellow

group 2 // GND / 1x0,22

conductor
material Tinned copper
capillary diameter - Flexible (DIN VDE 0295, IEC 60228 o CEI 20-29)
conductors number 1
rated section 0,22 mm²
insulation
material Foam polyolefin
colour Grey

total assembly make-up

intermediate taping
on make-up Around the total assembly.
material Transparent tape
total shield
on make-up On the tape.
material Tinned copper
shield shape Braid shield
coverage >=85 %
drain wire Not available
total taping
on make-up On the braid shield.
material Non-woven tape
total sheath
material Polyurethane non-abrasive
colour Gray RAL 7001
diameter (mm) 5.8±0.3
Marking
Metric marking P/N 15166 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20236 80°C 30V - AWM I/II A/B 80°C 30V FT1 - CONTROL DATA 120 ohm (2x2x0,22+1x0,22) - year/week meter indication
electrical features
working voltage 30 V
test voltage 500 V
rated capacity <=45 pF/m
rated impedance 120±15% ohm
electrical resistance <=87,6 ohm/km
insulation resistance 5 Gohm/km
attenuation *** RS485 SERIAL + GND *** -------------------------------------------- ATTENUATION Frequency[MHz]/Attenuation.std(dB/100m)/Attenuation.typical( --/--/-- -
dynamic features
minimum bending radius static installation 6 times ø cable
working temperature static installation -30°C / +80°C
installation temperature text -5°C / +80°C
chain length notes Flexible use (not for drag chains)
notes For fixed installation without any mechanical stress.
approvals and standards
reference standards 1581, UL 758(UL); C22.2 n° 210(CSA); IEC 62026-1(EU); CEI EN 50325-1(EU); RS 485
ul csa approvals RU E244280 AWM STYLE 20236 80°C 30V CSA E244280 AWM I/II A/B 80°C 30V
fire behaviour FT1(CSA); IEC 60332-1-2(EU)
industrial oil resistance 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902
halogen free SI
Customs code
Customs-tariff number 85444993
Made in IT
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A..