technical data sheet

part number

23410

cable family

O.R. PMXX®  

request offer
print

Formation: 3G0,75+8x0,34

3GAWG19+8xAWG22

installation type: CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN

category: SENSOR/ACTUATOR - BOX

standard/approval: CE/UL/CSA

shielding: UNSHIELDED

UL RECOGNIZED E244280CSAHalogen FreeCERoHS

group 1 // Power supply / 3G0,75

conductor
material Bare copper
capillary diameter - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29)
conductors number 3
rated section 0,75 mm²
insulation
material Polyolefin
colour Blue, Brown, Green/Yellow.
taping
on make-up Between the two conductors rings
material Non-woven tape

group 2 // Signals / 8x0,34

conductor
material Bare copper
capillary diameter - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29)
conductors number 8
rated section 0,34 mm²
insulation
material Polyolefin
colour White, Green, Yellow, Grey, Pink, Red, Black, Violet.

total assembly make-up

total taping
on make-up Around the total assembly.
material Non-woven tape
total sheath
material Polyurethane non-abrasive
colour Matte black RAL 9005
diameter (mm) 8.5±0.35
Marking
Metric marking P/N 23410 TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20233 80°C 300V - AWM I/II A/B 80°C 300V FT1 - 3GAWG19+8xAWG22 - O.R. PMXX® 3G0,75+8x0,34 - 450/750V - IEC 60332-1-2 - year/week - CE meter indication
electrical features
working voltage 300 V
test voltage 2000 V
dynamic features
minimum bending radius static installation 3 times ø cable
minimum bending radius dynamic installation 6 times ø cable
working temperature static installation -50°C / +80°C
working temperature dynamic installation -40°C / +80°C
travel speed Up to 200 m/min
acceleration/deceleration Up to 30 m/sec²
cable length inside chain Up to 15 m
chain length notes (horizontal only)
guaranteed cycles Up to 5 Mio
notes The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department.
approvals and standards
ul csa approvals RU E244280 AWM STYLE 20233 80°C 300V CSA E244280 AWM I/II A/B 80°C 300V
fire behaviour FT1(CSA); IEC 60332-1-2(EU) HALOGEN FREE: IEC 60754-1(EU)
industrial oil resistance 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902
halogen free SI
UV resistance UV RESISTANT
Customs code
Customs-tariff number 85444995
Made in IT
revision
date 29032016
number 008
request offer
print
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A..

FOLLOW US

Linkedin Youtube