technical data sheet

part number

24176

cable family

O.R. FRX-ST®  

Formation: [4G10,00+(2x1,50)ST]ST Article no longermanaged

[4GAWG08+(2xAWG16)ST]ST

installation type: CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN

category: SERVOMOTOR + 1 PAIR

standard/approval: CE/UL/CSA

shielding: SHIELDED

UL RECOGNIZED E244280CSACERoHS2014/30/EU

group 1 // Power conductors / 4G10,00

conductor
material Bare copper
capillary diameter - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29)
conductors number 4
rated section 10,00 mm²
internal taping
on make-up Between conductor and insulation.
material Transparent tape
insulation
material Polyolefin
colour Black conductors marked U/L1, V/L2, W/L3 + Green/Yellow.

group 2 // Signal pair / 2x1,50

conductor
material Bare copper
capillary diameter - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29)
conductors number 2
rated section 1,50 mm²
insulation
material Polyolefin
colour Black and White.
intermediate taping
make-up Around the pair.
material Polyester tape
shield
on make-up On the tape.
material Tinned copper
shield shape Braid shield
coverage >=85
drain wire Not available
taping
on make-up On the shield.
material Polyester tape

total assembly make-up

intermediate taping
on make-up Around the total assembly.
material Non-woven tape
total shield
on make-up On the tape.
material Tinned copper
shield shape Braid shield
coverage >=85 %
drain wire Not available
total taping
on make-up On the shield.
material Non-woven tape
total sheath
material PVC
colour Orange RAL 2003 DESINA ®
diameter (mm) 20.5±0.5
Marking
Metric marking P/N 24176 TE.CO. E244280 - Fxx - cRUus - AWM STYLE 2570 80°C 1000V VW-1 - AWM I/II A/B 80°C 1000V FT1 - [4GAWG08+(2xAWG16)H2]H2 - O.R. FRX-ST® [4G10+(2x1,5)H2]H2 - IEC 60332-1-2 - year/week - DESINA® - CE meter indication
electrical features
working voltage 1000 V
test voltage 4000 V
dynamic features
minimum bending radius static installation 4 times ø cable
minimum bending radius dynamic installation 7.5 times ø cable
working temperature static installation -40°C / +80°C
working temperature dynamic installation -5°C / +80°C
travel speed Up to 180 m/min
acceleration/deceleration Up to 10 m/sec²
cable length inside chain Up to 20 m
chain length notes (horizontal only)
guaranteed cycles Up to 5 Mio
notes The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department.
approvals and standards
reference standards 1581, UL 758(UL); C22.2 n° 210(CSA)
ul csa approvals RU E244280 AWM STYLE 2570 80°C 1000V CSA E244280 AWM I/II A/B 80°C 1000V
fire behaviour VW-1(UL); FT1(CSA); IEC 60332-1-2(EU)
industrial oil resistance 1581(UL); IEC 60811-404(EU); CEI EN 50363-4-1(EU); IRM 902
halogen free NO
compatibility
wiring/manufacturer Siemens / 6FX50
Customs code
Customs-tariff number 85444999
Made in IT
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A..