technical data sheet

part number

46640

cable family

O.R FRX-ST® PLUS  

Formation: (5x0,34)ST

(5xAWG22)ST

installation type: CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN

category: SIGNAL

standard/approval: CE/UL/CSA

shielding: SHIELDED

UL RECOGNIZED E244280CSACERoHS2014/30/EU

group // 5x0,34

conductor
material Bare copper
capillary diameter - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29)
conductors number 5
rated section 0,34 mm²
insulation
material Polyolefin
colour DIN 47100 - White, Brown, Green, Yellow, Grey.

total assembly make-up

intermediate taping
on make-up Around the total assembly.
material Non-woven tape
total shield
on make-up On the tape.
material Tinned copper
shield shape Overall shield
coverage >=85 %
drain wire Not available
total taping
on make-up On the shield.
material Non-woven tape
total sheath
colour Gray RAL 7001
diameter (mm) 5.7±0.2
Marking
Metric marking P/N ***** TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20042 90°C 300V VW-1 - AWM I/II A/B 90°C 300V FT1 - (nxXAWG) - O.R. FRX-ST® (nxY)SH - IEC 60332-1-2 - year/week - CE meter indication
electrical features
working voltage 300 V
test voltage 2000 V
rated capacity <60 pF/m (at 800 Hz) pF/m
insulation resistance >1 Gohm/Km acc. EN 50395 part.8
additional note BRAIDED RESISTANCE
additional note text Max 250 ohm/Km (at 30 MHz)
dynamic features
minimum bending radius static installation 6 times ø cable
minimum bending radius dynamic installation 7.5 times ø cable
working temperature static installation -40°C / +90°C
working temperature dynamic installation -5°C / +90°C
travel speed Up to 180 m/min
acceleration/deceleration Up to 10 m/sec²
cable length inside chain Up to 10 m
chain length notes (horizontal only)
guaranteed cycles Up to 5 Mio
notes The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department.
approvals and standards
reference standards 1581, UL 758(UL); C22.2 n° 210(CSA); Referring to DIN VDE 0207,0285,0819 and 0295.
ul csa approvals RU E244280 AWM STYLE 20042 90°C 300V CSA E244280 AWM II A/B 90°C 300V
fire behaviour VW-1(UL); FT1(CSA); IEC 60332-1-2(EU); DIN VDE 0482-332-1-2; DIN EN 60 332-1-2; UL CABLE FLAME
industrial oil resistance 1581(UL); IEC 60811-404(EU); CEI EN 50363-4-1(EU); VDE 0473-811-404
halogen free NO
UV resistance ASTM ASTM-D-2565-16; EN 50289-4-17(EU); ISO 4892-2
Customs code
Customs-tariff number 85444995
Made in IT
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A..