formación: (2x2xAWG26+2xAWG22)SN/ST Article no longermanaged
tipo de instalación: CABLE FOR STATIC INSTALLATION
categoría: DRIVE CLIQ®
Normativa/Homologación: UL/CSA
apantallamiento: SHIELDED
conductor | |
---|---|
material | Bare copper |
diámetro capilar | - Flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) |
número conductores | 4 |
sección nominal | AWG26 AWG |
aislamiento | |
---|---|
material | Polyolefin |
color | Pink-Blue, Yellow-Green. |
conductor | |
---|---|
material | Tinned copper |
diámetro capilar | - Flexible (DIN VDE 0295, IEC 60228 o CEI 20-29) |
número conductores | 2 |
sección nominal | AWG22 AWG |
aislamiento | |
---|---|
material | Polyolefin |
color | Red-Black. |
encintado intermedio | |
---|---|
composición | Around the total assembly. |
material | Non-woven tape |
pantalla total | |
---|---|
composición | On the tape. Aluminium outside |
material | Aluminium/polyester tape |
forma pantalla | Overlapped shielding tape |
cobertura | >100 % |
conductor drenaje | Not available |
pantalla total externa | |
---|---|
composición | On the tape shield. |
material | Tinned copper |
forma pantalla | Braid shield |
cobertura | 85 % |
hilo de drenaje | Not available |
encintado total | |
---|---|
composición | On the braid shield. |
material | Non-woven tape |
cubierta exterior | |
---|---|
material | PVC |
color | Green RAL 6018 DESINA ® |
diámetro (mm) | 7±0.35 |
Marcado | |
---|---|
marca métrica | P/N 24206 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 2502 80°C 30V - AWM I/II A/B 80°C 30V FT1 - O.R . FE-ST (2x2xAWG26+2xAWG22)H/H2 - year/week - DESINA® meter indication |
características eléctricas | |
---|---|
tensión de funcionamiento | 30 V |
tensión de prueba | 500 V |
capacidad nominal | (AWG26) <=50 pF/m |
impedancia nominal | 100±15% ohm |
resistencia eléctrica | (AWG26) <=140 ohm/km; (AWG22) <=55,4 ohm/km |
resistencia aislamiento | >=1 Gohm/km |
velocidad de transmisión | Up to 100Mbit/s |
nota adicional | NEXT |
texto nota adicional | (at 100MHz 100m) > 32 dB |
características dinámicas | |
---|---|
radio mínimo de curvatura instalación fija | 8 times ø cable |
temperatura de funcionamiento instalación fija | -30°C / +80°C |
Temperatura durante la instalación | -5°C / +80°C |
notas | For fixed installation without any mechanical stress. |
homologaciones y normativas | |
---|---|
normativas de referencia | 1581, UL 758(UL); C22.2 n° 210(CSA); IEC 61156-3(EU); EN 50288-1(EU) |
homologaciones ul csa | RU E244280 AWM STYLE 2502 80°C 30V CSA E244280 AWM I/II A/B 80°C 30V |
comportamiento al fuego | FT1(CSA); IEC 60332-1-2(EU) |
resistencia a aceites industriales | 1581(UL); IEC 60811-404(EU); IRM 902 |
libre de halógenos | NO |
compatibilidad | |
---|---|
productor/cableado | Siemens / 6FX50 |
Código arancelario | |
---|---|
Disposición arancelaria | 85444993 |
Made in | IT |
revisión | |
---|---|
fecha | 28052013 |
número | 003 |
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A.. |