ficha técnica

referencia artículo

15220H

familia cable

O.R. FE-ST SERVO  

formación: [4G1,50+2x(2x0,75)ST]ST Article no longermanaged

[4GAWG16+2x(2xAWG19)ST]ST

tipo de instalación: CABLE FOR STATIC INSTALLATION

categoría: SERVOMOTOR + 2 PAIRS

Normativa/Homologación: CE/UL/CSA

apantallamiento: SHIELDED

UL RECOGNIZED E244280CSACERoHS2014/30/EU

grupo 1 // Power conductors / 4G1,50

conductor
material Bare copper
diámetro capilar - Flexible (DIN VDE 0295, IEC 60228 or CEI 20-29)
número conductores 4
sección nominal 1,50 mm²
aislamiento
material Polyolefin
color Black conductors marked U/L1, V/L2, W/L3 + Green/Yellow.

grupo 2 // Signal pairs / 2x(2x0,75)

conductor
material Bare copper
diámetro capilar - Flexible (DIN VDE 0295, IEC 60228 or CEI 20-29)
número conductores 4
sección nominal 0,75 mm²
aislamiento
material Polyolefin
color Black conductors with numbers 5-6 and 7-8.
encintado intermedio
formación On each pair.
material Polyester tape
pantalla
composición On each taped pair.
material Tinned copper
forma pantalla Braid shield
cobertura >=85
hilo de drenaje Not available
encintado
formación On each shielded pair.
material Polyester tape

composición del cable completo

encintado intermedio
composición Around the total assembly.
material Polyester tape
pantalla total
composición On the tape.
material Tinned copper
forma pantalla Braid shield
cobertura >=85 %
conductor drenaje Not available
encintado total
composición On the shield (optional).
material Non-woven tape
cubierta exterior
material PVC
color Orange RAL 2003 DESINA ®
diámetro (mm) 12.5±0.4
Marcado
marca métrica P/N 15220H TE.CO. E244280 - Fxx - cRUus - AWM STYLE 2570 80°C 1000V VW-1 - AWM I/II A/B 80°C 1000V FT1 - [4GAWG16+2x(2xAWG19)H2]H2 - O.R. FE-ST [4G1,5+2x(2x0,75)H2]H2 - IEC 60332-1-2 - year/week - DESINA® - CE meter indication
características eléctricas
tensión de funcionamiento 1000 V
tensión de prueba 4000 V
características dinámicas
radio mínimo de curvatura instalación fija 6 times ø cable
temperatura de funcionamiento instalación fija -30°C / +80°C
Temperatura durante la instalación -10°C / +80°C
notas For fixed installation without any mechanical stress.
homologaciones y normativas
normativas de referencia 1581, UL 758(UL); C22.2 n° 210(CSA)
homologaciones ul csa RU E244280 AWM STYLE 2570 80°C 1000V CSA E244280 AWM I/II A/B 80°C 1000V
comportamiento al fuego VW-1(UL); FT1(CSA); IEC 60332-1-2(EU)
resistencia a aceites industriales 1581(UL); IEC 60811-404(EU); IRM 902
libre de halógenos NO
Código arancelario
Disposición arancelaria 85444999
Made in IT
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A..