formación: (2x2x0,22+1x0,22)ST
(2x2xAWG24+1xAWG24)ST
tipo de instalación: CABLE FOR STATIC INSTALLATION
categoría: RS485 - 2 PAIRS + GND
Normativa/Homologación: UL/CSA
apantallamiento: SHIELDED
conductor | |
---|---|
material | Tinned copper |
diámetro capilar | - Flexible (DIN VDE 0295, IEC 60228 o CEI 20-29) |
número conductores | 2 |
sección nominal | 0,22 mm² |
aislamiento | |
---|---|
material | Foam polyolefin |
color | White-Brown, Green-Yellow |
conductor | |
---|---|
material | Tinned copper |
diámetro capilar | - Flexible (DIN VDE 0295, IEC 60228 o CEI 20-29) |
número conductores | 1 |
sección nominal | 0,22 mm² |
aislamiento | |
---|---|
material | Foam polyolefin |
color | Grey |
encintado intermedio | |
---|---|
composición | Around the total assembly. |
material | Transparent tape |
pantalla total | |
---|---|
composición | On the tape. |
material | Tinned copper |
forma pantalla | Braid shield |
cobertura | >=85 % |
conductor drenaje | Not available |
encintado total | |
---|---|
composición | On the braid shield. |
material | Non-woven tape |
cubierta exterior | |
---|---|
material | Polyurethane non-abrasive |
color | Gray RAL 7001 |
diámetro (mm) | 5.8±0.3 |
Marcado | |
---|---|
marca métrica | P/N 15166 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20236 80°C 30V - AWM I/II A/B 80°C 30V FT1 - CONTROL DATA 120 ohm (2x2x0,22+1x0,22) - year/week meter indication |
características eléctricas | |
---|---|
tensión de funcionamiento | 30 V |
tensión de prueba | 500 V |
capacidad nominal | <=45 pF/m |
impedancia nominal | 120±15% ohm |
resistencia eléctrica | <=87,6 ohm/km |
resistencia aislamiento | 5 Gohm/km |
atenuación | *** RS485 SERIAL + GND *** -------------------------------------------- ATTENUATION Frequency[MHz]/Attenuation.std(dB/100m)/Attenuation.typical( --/--/-- - |
características dinámicas | |
---|---|
radio mínimo de curvatura instalación fija | 6 times ø cable |
temperatura de funcionamiento instalación fija | -30°C / +80°C |
Temperatura durante la instalación | -5°C / +80°C |
notas longitud de la cadena | Flexible use (not for drag chains) |
notas | For fixed installation without any mechanical stress. |
homologaciones y normativas | |
---|---|
normativas de referencia | 1581, UL 758(UL); C22.2 n° 210(CSA); IEC 62026-1(EU); CEI EN 50325-1(EU); RS 485 |
homologaciones ul csa | RU E244280 AWM STYLE 20236 80°C 30V CSA E244280 AWM I/II A/B 80°C 30V |
comportamiento al fuego | FT1(CSA); IEC 60332-1-2(EU) |
resistencia a aceites industriales | 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902 |
libre de halógenos | SI |
Código arancelario | |
---|---|
Disposición arancelaria | 85444993 |
Made in | IT |
revisión | |
---|---|
fecha | 30032018 |
número | 005 |
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A.. |