formación: (1x2x0,50)SN/ccST
(1x2xAWG21)SN/ccST
tipo de instalación: CABLE FOR STATIC INSTALLATION
categoría: CANOPEN®
Normativa/Homologación: UL/CSA
apantallamiento: SHIELDED
conductor | |
---|---|
material | Tinned copper |
diámetro capilar | - Flexible conductor |
número conductores | 2 |
sección nominal | 0,50 mm² |
aislamiento | |
---|---|
material | Foam polyolefin |
color | White, Brown |
encintado intermedio | |
---|---|
composición | Around the total assembly. |
material | Polyester tape |
pantalla total | |
---|---|
composición | On the tape. Aluuminum outside |
material | Aluminium/polyester tape |
forma pantalla | Overlapped shielding tape |
cobertura | >100 % |
conductor drenaje | Not available |
pantalla total externa | |
---|---|
composición | On the tape shield. |
material | Tinned copper |
forma pantalla | Braid shield + drain wire |
cobertura | 85 % |
hilo de drenaje | Available |
material drenaje | Tinned copper |
sección nominal drenaje | 0,34 |
encintado total | |
---|---|
composición | On the braid shield. |
material | Non-woven tape |
cubierta exterior | |
---|---|
material | PVC |
color | Violet RAL 4001 |
diámetro (mm) | 6.7±0.35 |
Marcado | |
---|---|
marca métrica | P/N 17970 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 2502 80°C 30V - AWM I/II A/B 80°C 30V FT1 - (2xAWG21)H/H2 - O.R. FE-ST CAN OPEN - (2x0,5)H/H2 - year/week meter indication |
características eléctricas | |
---|---|
tensión de funcionamiento | 30 V |
tensión de prueba | 500 V |
capacidad nominal | <=50 pF/m |
impedancia nominal | 120±15% ohm |
resistencia eléctrica | <=43,6 ohm/km |
resistencia aislamiento | 500 Mohm/Km |
velocidad de transmisión | Up to 1Mbit/s |
características dinámicas | |
---|---|
radio mínimo de curvatura instalación fija | 6 times ø cable |
temperatura de funcionamiento instalación fija | -30°C / +80°C |
Temperatura durante la instalación | -5°C / +80°C |
notas | For fixed installation without any mechanical stress. |
homologaciones y normativas | |
---|---|
normativas de referencia | 1581, UL 758(UL); C22.2 n° 210(CSA); ISO 11898; RS 485 |
homologaciones ul csa | RU E244280 AWM STYLE 2502 80°C 30V CSA E244280 AWM I/II A/B 80°C 30V |
comportamiento al fuego | FT1(CSA); IEC 60332-1-2(EU) |
resistencia a aceites industriales | 1581(UL); IEC 60811-404(EU); IRM 902 |
libre de halógenos | NO |
Código arancelario | |
---|---|
Disposición arancelaria | 85444993 |
Made in | IT |
revisión | |
---|---|
fecha | 24092018 |
número | 005 |
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A.. |