Zusammensetzung: (1x2xAWG22/7)SN/ST
Verlegungsart: CABLE FOR STATIC INSTALLATION
Kategorie: PROFIBUS®
Anforderungen/Zulassungen: CE/UL/CSA
Abschirmung: SHIELDED
Ader | |
---|---|
Material | Bare copper |
Kapillardurchmesser | - Flexible (DIN VDE 0295, IEC 60228 o CEI 20-29) |
Aderzahl | 2 |
auswählen Nennwert | AWG22 AWG |
Isolierung | |
---|---|
Material | Foam polyolefin |
Farbe | Green, Red. |
Zwischen-Bandumwicklung | |
---|---|
auf Zusammensetzung | Around the total assembly. |
Material | Polyester tape |
Gesamt-Schirm | |
---|---|
auf Zusammensetzung | On the tape. Aluminium outside. |
Material | Aluminium/polyester tape |
Schirmform | Overlapped shielding tape |
Abdeckung | >100 % |
Beidraht-Ader | Not available |
Gesamt-außenchirm | |
---|---|
auf Zusammensetzung | On the tape shield. |
Material | Tinned copper |
Schirmform | Braid shield |
Abdeckung | 65 % |
Beidraht-Ader | Not available |
Gesamt-Mantel | |
---|---|
Material | PVC |
Farbe | Violet RAL 4001 DESINA ® |
Durchmesser (mm) | 8±0.35 |
Kennzeichnung | |
---|---|
Metrisches markieren | P/N 15050 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 2571 80°C VW-1 - AWM I/II A/B 80°C 300V FT1 - PROFIBUS - FLEXIBLE CONTROL DATA - BUS - DP - F.I.P. - 150ohm - O.R. FE (1x2xAWG22)H/H2 - year/week - batch - DESINA® - CE meter indication |
elektrische-Merkmale | |
---|---|
Betriebsspannung | 300 V |
Testspannung | 2000 V |
nennkapazität | <=30 pF/m |
Nennimpedanz | 150±10% ohm |
elektrischer-Widerstand | <=55,4 ohm/km |
Isolierwiderstand | 5 Gohm/km |
Übertragungsgeschwindigkeit | Up to 12Mbit/s |
Ausbreitungsgeschwindigkeit | 77% |
Abschwächung | ** PROFIBUS® DP *** ATTENUATION Frequency[MHz]/attenuation.std(dB/100m)/Attenuation.typical[ 0,0096/0,3/--/ - 0,0384/0,5/--/ - 4/3,2/--/ - 10/3,2/--/ - 16/4,0/--/ - |
dynamische-Merkmale | |
---|---|
Mindestbiegeradius festinstallation | 10 times ø cable |
Betriebstemperatur festinstallation | -30°C / +80°C |
Installationstemperatur Text | -5°C / +80°C |
Anmerkungen | For fixed installation without any mechanical stress. |
Zulassungen und Normen | |
---|---|
Referenznormen | 1581, UL 758(UL); C22.2 n° 210(CSA); DIN EN 61784-1, DIN EN 61158; NETBUS L2/F.I.P.(Factor,Instrumentation,Protocol), PROFIBUS® DP (DIN 19245), RS 485 |
UL/CSA Zulassungen | RU E244280 AWM STYLE 2571 80°C CSA E244280 AWM I/II A/B 80°C 300V |
Brandverhalten | VW-1(UL); FT1(CSA); IEC 60332-1-2(EU) |
Bestendigkeit gegen Industrieöle | 1581(UL); IEC 60811-404(EU); CEI EN 50363-4-1(EU); ICEA S-82-552; IRM 902 |
halogenfrei | NO |
Kompatibilität | |
---|---|
Verkabelung/hersteller | Siemens / 6XV1830-0EH10 |
Zollnummer | |
---|---|
Zolltarif | 85444995 |
Made in | IT |
Bearbeitung | |
---|---|
Datum | 30032018 |
Nummer | 004 |
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A.. |