Formation: (1x2xAWG22/7)SN/ST
installation type: CABLE FOR STATIC INSTALLATION
category: PROFIBUS®
standard/approval: CE/UL/CSA
shielding: SHIELDED
conductor | |
---|---|
material | Bare copper |
capillary diameter | - Flexible (DIN VDE 0295, IEC 60228 o CEI 20-29) |
conductors number | 2 |
rated section | AWG22 AWG |
insulation | |
---|---|
material | Foam polyolefin |
colour | Green, Red. |
intermediate taping | |
---|---|
on make-up | Around the total assembly. |
material | Polyester tape |
total shield | |
---|---|
on make-up | On the tape. Aluminium outside. |
material | Aluminium/polyester tape |
shield shape | Overlapped shielding tape |
coverage | >100 % |
drain wire | Not available |
total shield external | |
---|---|
on make-up | On the tape shield. |
material | Tinned copper |
shield shape | Braid shield |
coverage | 65 % |
drain wire | Not available |
total sheath | |
---|---|
material | PVC |
colour | Violet RAL 4001 DESINA ® |
diameter (mm) | 8±0.35 |
Marking | |
---|---|
Metric marking | P/N 15050 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 2571 80°C VW-1 - AWM I/II A/B 80°C 300V FT1 - PROFIBUS - FLEXIBLE CONTROL DATA - BUS - DP - F.I.P. - 150ohm - O.R. FE (1x2xAWG22)H/H2 - year/week - batch - DESINA® - CE meter indication |
electrical features | |
---|---|
working voltage | 300 V |
test voltage | 2000 V |
rated capacity | <=30 pF/m |
rated impedance | 150±10% ohm |
electrical resistance | <=55,4 ohm/km |
insulation resistance | 5 Gohm/km |
transmission speed | Up to 12Mbit/s |
propagation speed | 77% |
attenuation | ** PROFIBUS® DP *** ATTENUATION Frequency[MHz]/attenuation.std(dB/100m)/Attenuation.typical[ 0,0096/0,3/--/ - 0,0384/0,5/--/ - 4/3,2/--/ - 10/3,2/--/ - 16/4,0/--/ - |
dynamic features | |
---|---|
minimum bending radius static installation | 10 times ø cable |
working temperature static installation | -30°C / +80°C |
installation temperature text | -5°C / +80°C |
notes | For fixed installation without any mechanical stress. |
approvals and standards | |
---|---|
reference standards | 1581, UL 758(UL); C22.2 n° 210(CSA); DIN EN 61784-1, DIN EN 61158; NETBUS L2/F.I.P.(Factor,Instrumentation,Protocol), PROFIBUS® DP (DIN 19245), RS 485 |
ul csa approvals | RU E244280 AWM STYLE 2571 80°C CSA E244280 AWM I/II A/B 80°C 300V |
fire behaviour | VW-1(UL); FT1(CSA); IEC 60332-1-2(EU) |
industrial oil resistance | 1581(UL); IEC 60811-404(EU); CEI EN 50363-4-1(EU); ICEA S-82-552; IRM 902 |
halogen free | NO |
compatibility | |
---|---|
wiring/manufacturer | Siemens / 6XV1830-0EH10 |
Customs code | |
---|---|
Customs-tariff number | 85444995 |
Made in | IT |
revision | |
---|---|
date | 30032018 |
number | 004 |
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A.. |