Zusammensetzung: [(2xAWG18)SN+(2xAWG15)SN]ccST Article no longermanaged
** TRUNK **
Verlegungsart: CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN
Kategorie: DEVICENET™
Anforderungen/Zulassungen: CE/UL/CSA
Abschirmung: SHIELDED
Ader | |
---|---|
Material | Tinned copper |
Kapillardurchmesser | - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) |
Aderzahl | 2 |
auswählen Nennwert | AWG18 AWG |
Isolierung | |
---|---|
Material | Foam polyolefin |
Farbe | Blue, White. |
Schirm | |
---|---|
auf Zusammensetzung | Around the pair. Aluminium outside. |
Material | Aluminized tape |
Schirmform | Overlapped shielding tape |
Abdeckung | >100 |
Beidraht-Ader | Not available |
Ader | |
---|---|
Material | Tinned copper |
Kapillardurchmesser | - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) |
Aderzahl | 2 |
auswählen Nennwert | AWG15 AWG |
Isolierung | |
---|---|
Material | Polyolefin |
Farbe | Red, Black. |
Schirm | |
---|---|
auf Zusammensetzung | Around the pair. Aluminium outside. |
Material | Aluminized tape |
Schirmform | Overlapped shielding tape |
Abdeckung | >100 |
Beidraht-Ader | Not available |
Gesamt-Schirm | |
---|---|
auf Zusammensetzung | Around the total assembly. (Drain in the inner side) |
Material | Tinned copper |
Schirmform | Braid shield + drain wire |
Abdeckung | >=85 % |
Beidraht-Ader | Available |
Beidraht-Material | Tinned copper |
Beidraht-Nennquerschnitt | AWG18 |
Gesamt-Bandumwicklung | |
---|---|
auf-Zusammensetzung | On the shield. |
Material | Non-woven tape |
Gesamt-Mantel | |
---|---|
Material | Polyurethane non-abrasive |
Farbe | Violet RAL 4001 |
Durchmesser (mm) | 11.6±0.5 |
Kennzeichnung | |
---|---|
Metrisches markieren | P/N 14423 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20233 80°C 300V - AWM I/II A/B 80°C 300V FT1 - CONTROL DATA BUS - DeviceNet - O.R. PMXX-ST® [(2xAWG18)H+(2xAWG15)H]H2 - year/week - CE meter indication |
elektrische-Merkmale | |
---|---|
Betriebsspannung | 300 V |
Testspannung | 2000 V |
nennkapazität | (AWG18) <=46 pF/m |
Nennimpedanz | 120±10% ohm |
elektrischer-Widerstand | (AWG18) <=21,8 ohm/km;(AWG15) <=10,9 ohm/km |
Isolierwiderstand | <=5 Gohm/km |
Übertragungsgeschwindigkeit | Up to 500Kbit/s |
dynamische-Merkmale | |
---|---|
Mindestbiegeradius festinstallation | 6 times ø cable |
Mindestbiegeradius mobile verlegung | 10 times ø cable |
Betriebstemperatur festinstallation | -50°C / +80°C |
Betriebstemperatur mobile verlegung | -40°C / +80°C |
Verschiebungsgeschwindigkeit | Up to 200 m/min |
Beschleunigung-Verzögerung | Up to 10 m/sec² |
Kabellänge in der Kette | Up to 15 m |
Kabellänge Anmerkungen | (horizontal only) |
garantierte-Zyklen | Up to 5 Mio |
Anmerkungen | For application in dynamics installation with very low temperatures contact our technical department. |
Zulassungen und Normen | |
---|---|
Referenznormen | 1581, UL 758(UL); C22.2 n° 210(CSA); IEC 62026-3, IEC EN 50325-2(EU); DIN EN 61158; ISO 11898 |
UL/CSA Zulassungen | RU E244280 AWM STYLE 20233 80°C 300V CSA E244280 AWM I/II A/B 80°C 300V |
Brandverhalten | FT1(CSA); IEC 60332-1-2(EU) HALOGEN FREE: IEC 60754-1(EU) |
Bestendigkeit gegen Industrieöle | 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902 |
halogenfrei | SI |
Bestendigkeit gegen UV-Strahlen | UV RESISTANT |
Zollnummer | |
---|---|
Zolltarif | 85444995 |
Made in | IT |
Bearbeitung | |
---|---|
Datum | 30032018 |
Nummer | 008 |
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A.. |