Formation: (2x2xAWG24/7)SN/ST/PUR
installation type: CABLE FOR STATIC INSTALLATION
category: ETHERNET®
standard/approval: CE/UL/CSA
shielding: SHIELDED
conductor | |
---|---|
material | Bare copper |
capillary diameter | - Flexibile (DIN VDE 0295, IEC 60228 o CEI 20-29) |
conductors number | 4 |
rated section | AWG24 AWG |
insulation | |
---|---|
material | Polyolefin |
colour | Orange-White/Orange*, Green-White/Green* *Ring bicolor. |
intermediate taping | |
---|---|
on make-up | Around the total assembly. |
material | Transparent tape |
total shield | |
---|---|
on make-up | On the tape. Aluminum outside |
material | Aluminium/polyester tape |
shield shape | Overlapped shielding tape |
coverage | >100 % |
drain wire | Not available |
total shield external | |
---|---|
on make-up | On the tape shield. |
material | Tinned copper |
shield shape | Braid shield |
coverage | 85 % |
drain wire | Not available |
total taping | |
---|---|
on make-up | On the braid shield. |
material | Non-woven tape |
total sheath | |
---|---|
material | Polyurethane non-abrasive |
colour | Green RAL 6016 |
diameter (mm) | 5.8±0.25 |
Marking | |
---|---|
Metric marking | P/N 15010 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20549 80°C 300V - AWM I/II A/B 80°C 300V FT1 - ETHERNET CABLE CAT.5E - O.R. FE (2x2xAWG24/7)H/H2 - year/week - CE meter indication |
electrical features | |
---|---|
working voltage | 300 V |
test voltage | 2000 V |
rated capacity | (c/c) <=50 pF/m |
rated impedance | 100±15% ohm |
electrical resistance | (Cond.) <=90 ohm/Km; Loop <=144 ohm/km |
insulation resistance | >1 Gohm/km |
transmission speed | Up to 100Mbit/s |
propagation speed | 67% |
attenuation | *** ETHERNET cat. 5E *** ------------------------------------------- ATTENUATION Frequency[MHz]/Attenuation.std(dB/100m)/Attenuation.typical[ 1/2,1/2,0 - 4/4,0/3,8 - 10/6,3/5,7 - 16/8,0/7,1 - 20/9,0/7,9 - 31,25/11, 100/21,3/18,3 - 125/--/21,9 - 155,52/--/23,4 - 200/--/26,3 |
dynamic features | |
---|---|
minimum bending radius static installation | 8 times ø cable |
working temperature static installation | -40°C / +80°C |
installation temperature text | -5°C / +80°C |
notes | For fixed installation without any mechanical stress. |
approvals and standards | |
---|---|
reference standards | 1581, UL 758(UL); C22.2 n° 210(CSA); IEC 61156-3(EU); CEI EN 50288-2-2(EU); EIA/TIA 568-B.2; ISO/IEC 11801-1 (CL. D) |
ul csa approvals | RU E244280 AWM STYLE 20549 80°C 300V CSA E244280 AWM I/II A/B 80°C 300V |
fire behaviour | FT1(CSA); IEC 60332-1-2(EU) HALOGEN FREE: IEC 60754-1(EU) |
industrial oil resistance | 1581(UL); IEC 60811-404(EU); IRM 902 |
halogen free | SI |
Customs code | |
---|---|
Customs-tariff number | 85444995 |
Made in | IT |
revision | |
---|---|
date | 23042018 |
number | 008 |
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A.. |