Formation: [4G2,5+(2x1,5)ST+(4xAWG26)SN/ST/R]ST
[4GAWG14+(2xAWG16)ST+(4xAWG26)SN/ST/R]ST
installation type: CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN
category: HYBRID SERVOMOTOR
standard/approval: CE/UL/CSA
shielding: SHIELDED
conductor | |
---|---|
material | Bare copper |
capillary diameter | - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) |
conductors number | 4 |
rated section | 2,50 mm² |
insulation | |
---|---|
material | Polyolefin |
colour | UNEL conductors marked: Brown U/L1, Black V/L2, Grey W/L3 + Green/Yellow. |
conductor | |
---|---|
material | Bare copper |
capillary diameter | - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) |
conductors number | 2 |
rated section | 1,50 mm² |
insulation | |
---|---|
material | Polyolefin |
colour | Black and White. |
intermediate taping | |
---|---|
make-up | Around the pair. |
material | Polyester tape |
shield | |
---|---|
on make-up | On the tape. |
material | Tinned copper |
shield shape | Braid shield |
coverage | >=85 |
drain wire | Not available |
taping | |
---|---|
on make-up | On the shield. |
material | Polyester tape |
conductor | |
---|---|
material | Bare copper |
capillary diameter | - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) |
conductors number | 4 |
rated section | AWG26 AWG |
insulation | |
---|---|
material | Polyolefin |
colour | Clockwise sequence: Yellow, Blue, Green, Orange. Pairs matching (opposite conductors): Yellow-Green, Blue-Orange. |
intermediate taping | |
---|---|
make-up | On the tape |
material | Non-woven tape |
additional shield | |
---|---|
on make-up | On the tape |
material | Aluminium/polyester tape |
shield shape | Braid shield on bus pair |
coverage | 100 |
drain wire | Not available |
shield | |
---|---|
on make-up | On the tape shield |
material | Tinned copper |
shield shape | Braid shield |
coverage | >=85 |
drain wire | Not available |
sheath | |
---|---|
make-up | On th braided shield |
material | Special Polyurethane compound |
colour | Natural |
intermediate taping | |
---|---|
on make-up | Around the total assembly. |
material | Non-woven tape |
total shield | |
---|---|
on make-up | On the tape. |
material | Tinned copper |
shield shape | Overall shield |
coverage | >=85 % |
drain wire | Not available |
total taping | |
---|---|
on make-up | On the shield. |
material | Non-woven tape |
total sheath | |
---|---|
material | Polyurethane non-abrasive |
colour | Orange RAL 2003 DESINA ® |
diameter (mm) | 13.9±0.35 |
Marking | |
---|---|
Metric marking | E83517 - cRUus - AWM STYLE 21223 80°C 1000V - AWM I/II A/B 80°C 1000V FT1- [4G2,5+(2X1,5)H2+(4XAWG26)HH2]H2 - (Week/Year) - DESINA - CE |
electrical features | |
---|---|
working voltage | 1000 V |
test voltage | 3000 V |
rated capacity | (C/C)<=50 (4XAWG26) (800÷1000Hz) pF/m |
rated impedance | 100 (4XAWG26) (10MHz) ohm |
electrical resistance | (AWG26)<=131,0; (2,50 mmq)<=7,98; (1,50 mmq)<=13,3 ohm/km |
insulation resistance | >=500 Mohm/km |
dynamic features | |
---|---|
minimum bending radius static installation | 5 times ø cable |
minimum bending radius dynamic installation | 10 times ø cable |
working temperature static installation | -40°C / +80°C |
working temperature dynamic installation | -40°C / +80°C |
travel speed | Up to 300 m/min |
acceleration/deceleration | Up to 50 m/sec² |
cable length inside chain | Up to 20 m |
guaranteed cycles | Up to 5 Mio |
torsions | +/- 30°/m |
notes | For application in dynamics installation with very low temperatures contact our technical department |
approvals and standards | |
---|---|
reference standards | 1581, UL 758(UL); C22.2 n° 210(CSA) |
ul csa approvals | RU E83517 AWM STYLE 21223 80°C 1000V CSA E83517 AWM I/II A/B 80°C 1000V |
fire behaviour | FT1(CSA); IEC 60332-1-2(EU); EN 50265-1-2(EU) HALOGEN FREE: IEC 60754-1(EU); EN 50267-2-1(EU) |
industrial oil resistance | 1581(UL); IEC 60811-404/507(EU); VDE 0472 p. 803 A/B; HD 22.10.S1 |
halogen free | SI |
compatibility | |
---|---|
wiring/manufacturer | Siemens / S210 |
Customs code | |
---|---|
Customs-tariff number | 85444999 |
Made in | IT |
revision | |
---|---|
date | 04062021 |
number | 001 |
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A.. |