technical data sheet

part number


cable family


Formation: [4x(2x0,25)ST]ST




standard/approval: CE/UL/CSA

shielding: SHIELDED


group // 4x2x0,25

material Tinned copper
capillary diameter - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29)
conductors number 8
rated section 0,25 mm²
material Polyolefin
colour White-Blue, White-Red, White-Green.
intermediate taping
make-up On each taped pair.
material Polyester tape
on make-up Around each pair.
material Tinned copper
shield shape Braid shield
coverage >=85
drain wire Not available
make-up On the tape.
material Polyester
colour BLACK

total assembly make-up

intermediate taping
on make-up Around the total assembly.
material Non-woven tape
total shield
on make-up On the tape.
material Tinned copper
shield shape Overall shield
coverage >=85 %
drain wire Not available
total taping
on make-up On the shield.
material Non-woven tape
total sheath
colour Green RAL 6018 DESINA ®
diameter (mm) 9±0.4
Metric marking P/N 46633 TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20042 90°C 300V VW-1 - AWM I/II A/B 90°C 300V FT1 - (4x(2x24AWG)) - O.R. FRX-ST® [4x(2x0,25)SH]SH - IEC 60332-1-2 - year/week - DESINA® - CE meter indication
electrical features
working voltage 300 V
test voltage 2000V; c/c c/all. screen 2000Vrms,1min V
rated impedance Max 250 Ohm/m (30 MHz) ohm
insulation resistance >=1 Gohm/Km EN 50395 prt.8 (90°C)
additional note BRAIDED RESISTANCE
additional note text Max 250 ohm/Km (at 30 MHz)
dynamic features
minimum bending radius static installation 6 times ø cable
minimum bending radius dynamic installation 7.5 times ø cable
working temperature static installation -40°C / +90°C
working temperature dynamic installation -5°C / +90°C
travel speed Up to 180 m/min
acceleration/deceleration Up to 10 m/sec²
cable length inside chain Up to 20 m
chain length notes (horizontal only)
guaranteed cycles Up to 5 Mio
notes The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department.
approvals and standards
reference standards UL 758(UL); C22.2 n° 210(CSA)
ul csa approvals RU E244280 AWM STYLE 20042 90°C 300V CSA E244280 AWM II A/B 90°C 300V
fire behaviour VW-1(UL); FT1(CSA); IEC 60332-1-2(EU); DIN VDE 0482-332-1-2; DIN EN 60 332-1-2; UL CABLE FLAME
industrial oil resistance 1581(UL); IEC 60811-404(EU); CEI EN 50363-4-1(EU); VDE 0473-811-404
halogen free NO
UV resistance ASTM ASTM-D-2565-16; EN 50289-4-17(EU); ISO 4892-2
Customs code
Customs-tariff number 85444995
Made in IT
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: – E-mail: – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A..