formación: (1x2x0,34)ccST
(1x2xAWG22)ccST
tipo de instalación: CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN
categoría: CANOPEN®
Normativa/Homologación: UL/CSA
apantallamiento: SHIELDED
conductor | |
---|---|
material | Tinned copper |
diámetro capilar | - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) |
número conductores | 2 |
sección nominal | 0,34 mm² |
aislamiento | |
---|---|
material | Polyolefin |
color | White, Brown. |
encintado intermedio | |
---|---|
composición | Around the total assembly. |
material | Polyester tape |
pantalla total | |
---|---|
composición | On the tape. |
material | Tinned copper |
forma pantalla | Braid shield + drain wire |
cobertura | >=85 % |
conductor drenaje | Available |
material drenaje | Tinned copper |
sección nominal drenaje | 0,34 |
encintado total | |
---|---|
composición | On the braid shield. |
material | Non-woven tape |
cubierta exterior | |
---|---|
material | Polyurethane non-abrasive |
color | Violet RAL 4001 |
diámetro (mm) | 6.1±0.3 |
Marcado | |
---|---|
marca métrica | P/N 19195 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20236 80°C 30V - AWM I/II A/B 80°C 30V FT1 - (1x2xAWG22)H2 - O.R. PMXX-ST® CAN OPEN (1x2x0,34)H2 - year/week meter indication |
características eléctricas | |
---|---|
tensión de funcionamiento | 30 V |
tensión de prueba | 500 V |
capacidad nominal | <=50 pF/m |
impedancia nominal | 120±10% ohm |
resistencia eléctrica | <=55,4 ohm/km |
velocidad de transmisión | Up to 1Mbit/s |
características dinámicas | |
---|---|
radio mínimo de curvatura instalación fija | 6 times ø cable |
radio mínimo de curvatura instalación móvil | 10 times ø cable |
temperatura de funcionamiento instalación fija | -50°C / +80°C |
temperatura de funcionamiento instalación móvil | -40°C / +80°C |
velocidad de desplazamiento | Up to 200 m/min |
aceleración desaceleración | Up to 10 m/sec² |
longitud del cable en cadena | Up to 15 m |
notas longitud de la cadena | (horizontal only) |
ciclos garantizados | Up to 5 Mio |
notas | The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department. |
homologaciones y normativas | |
---|---|
normativas de referencia | 1581, UL 758(UL); C22.2 n° 210(CSA); ISO 11898; RS 485 |
homologaciones ul csa | RU E244280 AWM STYLE 20236 80°C 30V CSA E244280 AWM I/II A/B 80°C 30V |
comportamiento al fuego | FT1(CSA); IEC 60332-1-2(EU) HALOGEN FREE: IEC 60754-1(EU) |
resistencia a aceites industriales | 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902 |
libre de halógenos | SI |
resistencia a rayos uv | UV RESISTANT |
Código arancelario | |
---|---|
Disposición arancelaria | 85444993 |
Made in | IT |
revisión | |
---|---|
fecha | 30032018 |
número | 006 |
TE.CO. reserves the right to make some modifications to the products notwithstanding the basic technical characteristics. Unless otherwise stated, all indicated data are nominal. RAL colour is stated only as reference. TE.CO. Tecnologia Commerciale S.p.A. – Via Achille Grandi, 1 – 40013 Castel Maggiore (Bologna – Italia) – Tel +39 051 6047311 Web: www.tecoit.com – E-mail: sales@tecoit.com – Reg. Impr. Bologna e Codice Fiscale 03163100377 – P.IVA IT 01636081208. Subject to management and coordination activities handled by Pronos S.r.l.. All rights are reserved. The reproduction of any part of this document is not allowed without the written authorization of TE.CO. Tecnologia Commerciale S.p.A.. |