For special applications in drive systems such as servomotor and encoder-resolver connections, TE.CO. offers servomotor power cables that comply with the leading servomotor manufacturers’ standards.

Servomotors and inverters are usually connected with two cables: one for power and one for feedback that transmits data to the control system.

The TE.CO. range includes  DESINA, servomotor cable solutions for static and dynamic installation in raceways with external orange jacket in power only (without control pair), with brake pair or double control pair for brake and overload configurations.

The O.R. FE-ST SERVO/FRX-ST®/PMXX-ST®/PMMXX-ST® cable family is the top of the range for OEM machine manufacturers and cabling technicians who produce pre-wired solutions for brushless servomotor connections.

Conductors are insulated with low capacity polyolefin, which improves their electrical qualities, reducing disturbances such as harmonics or voltage spikes, especially in very long lines. All the shielded versions have coverage equal to or higher than 85%, so they are not affected by produced or induced disturbances and are perfectly compliant with the current EMC rules.

Cables are sheathed in a PVC or PUR oil-proof external jacket according to the specific requirements of the most extreme applications in raceways, with even excellent low temperature resistance.

JACKET SHIELD INSULATION REFERENCE

STANDARDS

WORKING

VOLTAGE

[V]

MIN. BENDING

RADIUS

[x Ø CAVO]

TE.CO. RANGE TYPE OF INSTALLATION
PVC Yes PE 1000 7,5 FRX-ST® DYNAMIC INSTALLATION
PUR Yes PE 300/1000 6/7,5 PMXX-ST® DYNAMIC INSTALLATION
PUR Yes PE 1000 5 PMMXX-ST® DYNAMIC INSTALLATION
PVC Yes PE 1000 O.R. FE-ST SERVO FIXED INSTALLATION

PVC = Polyvinylchloride

PE = Polyolefin

PUR = Polyurethane

Lastly, UL approvals on all O.R. FE-ST SERVO/FRX-ST®/PMXX-ST®/PMMXX-ST® servomotor cable families allow cables to be used for applications in the North American market.

Fill out the form for a free estimate.